Besides Sanding And Staining What Else To Finish Hardwood Floors

Think of recoating as a type of regular maintenance for a hardwood floor rather than a real refinishing.

Besides sanding and staining what else to finish hardwood floors.

A good method of staining hardwood floors darker without sanding is to apply the stain directly after screening then cover it with clear finish. Still other contractors apply stain by squirting the floor with stain out of a clean condiment bottle and spreading it with a white pad on the buffer. Use a brush or roller to apply a coat of polyurethane finish. Instead of buffing the floor to prepare it for a new finish with this method you ll apply a chemical solution to do that job.

You ll need to sand the entire floor not just one section. Polyurethane is durable and provides a glass smooth finish that will protect your floor. Determine if using a chemical etching kit is the best method. Keep in mind steam water vinegar and cleaners like murphy s oil soap that produces suds should never be used to clean wood floors.

Liquids spilled on a polyurethane finish bead up and can be easily wiped away. Afterward mop using a micro cloth and concentrated cleaner specially made for hardwood floors. If sanding by hand use 3 different grits of sandpaper 30 60 and 80. Here we re using rags but some people prefer lambswool applicators.

We specializing in the floor sanding and restoration. Method squirt and mop and bona hardwood floor cleaner are two good ones. Sand floor in direction of grain of the wood. Vacuum floor between each sanding and when finished.

Refinishing hardwood floors is the process of removing the existing layer of finishing product which is usually done using a sanding tool to get down to the bare wood and then reapplying another coat to your floors to protect them and make them look brand new. Use a floor sanding machine and edge sander or sand by hand. If you apply a waterborne finish which dries in a couple of hours you can complete the entire operation in a day. Follow the grain of the wood when applying the polyurethane.

Let the first coat dry for six to eight hours. Remove shoe moulding the wood trim where the wall meets the floor. Before you start sanding remove everything from the room and vacuum the floor. Screening and recoating involves removing the old coat by abrading it with a floor buffer instead of doing a full sanding and then adding a new layer of water based polyurethane.